Panasonic KX-T1232. SMDR/CDR data format and connection settings
This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.
| Parameter |
Default value |
| Baud rate |
9600 |
| Data bits |
8 |
| Parity |
none |
| Stop bits |
1 |
| Flow control |
Hardware |
Default programming code for panasonic is 1234 or 0000 or 9999.
KX-TDA Series : KX-TDA30 KX-TDA50 KX-TDA100 KX-TDA200
Note: Our data logger cannot capture SMDR data through a USB port.
Open the KX-TDA Maintenance Console and go to:
Maintenance > SMDR
SMDR Type: TYPE C
Outgoing Call Print: Print
Incoming Call Print: Print
Intercom Call Print: Print
Log-in/Log-out Print: Print
ARS Dial (Automatic Route Selection): Dial after ARS Modification
CallerID Print format: Name + Number
DDI/DID Print format: Name + Number
Secret Dial: Print dialed number
Privacy mode: Print Dialed Number
Date Format: YY-MM-DD - named as international format
Maintenance > Miscellaneous
RS-232C: Baud Rate: 19200
RS-232C: NL Code: CR+LF
RS-232C: Word Length: 8bit
RS-232C: Parity Bit: None
Error Log Information Print: Print
System > Date & Time
Change the date and time to current ones.
KX-TD and KX-TA Series (newer)
Go to the main console (Extension 101) and put it to programming mode by moving the switch on the phone to programming position.
Press *#xxxx where xxxx if the password for programming. This is usually 1234 or 0000 or 9999. If you don't know the password then please contact the supplier.
[800] - RS-232C Communication Parameters: CR+LF, 9600, 8 bits, mark parity, 1 stop bit.
[801] - choose 0 (skip perforation)
[802] - incoming on and outgoing on
[803] - choose to print the speed dialing
[805] - choose account code report to be code or index.
[806] - choose English language reporting
move the programming switch to the original position
KX-TD and KX-TA Series (older ones)
The programming switch is located on the PBX unit - open the cover, and you'll find it and move it to programming mode.
[23] - Duration time count star mode: instantly (can be configured in the software)
[24] - SMDR Communication Parameters: CR+LF, 1200 bps, 7 bits, mark parity, 1 stop bit, 66 lines per page, skip perforation 0.
[26] - Outgoing: ON, Incoming: ON
move the programming switch to the original position
Pinout and wiring
| PBX (25 pin male) |
PC (9 pin female) |
PC (25 pin female) |
| 1 |
GND |
1 |
| 2 |
2 |
3 |
| 3 |
3 |
2 |
| 4 |
7 |
4 |
| 5,6 |
4 |
20 |
| 7 |
5 |
7 |
| 20 |
1, 6, 8 |
5, 6, 8 |
Configuring a COM port
The COM port number should match the number in your system. You can check the correct port number in Devices Manager → Ports.
1. Add a new configuration with the RS232 data source (if you didn't it before).
2. Select the COM port and configure the communication settings for your PBX corresponding to your PBX settings.
Selecting the correct parser for Panasonic KX-T1232
Data items
| Description | Data type | Column name |
|---|
| Call time | datetime | CALL_TIME |
| Extension | string | EXT |
| CO | string | TRUNK |
| Direction | string | DIRECTION |
| Dialed number | string | DIALED_PHONE |
| Caller | string | CALLER_PHONE |
| Call duration | datetime | CALL_DURATION |
| Call duration (s) | integer | CALL_DURATION_S |
| Account | string | ACC |
| CD | string | FLAG1 |
Interested in reports for PBX usage?
Choose our PBX Reports utility, equipped with manual, scheduled, and email reporting options, a built-in web server, and more. Implement your call accounting system for Panasonic KX-T1232. Look here
Want PBX call logs in a database?
Capturing and exporting SMDR or CDR data in real-time to your database is a standard feature of the logger. Follow this link
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.
