Aastra MX-ONE (MDFP15 format). SMDR/CDR data format and connection settings

This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.

Call logging for MX-ONE TSE over IP

The PBX can send the SMDR directly to the Advanced PBX Data Logger. You need to configure call info output as:

General format

callinfo_output_set -output 5 -lim 1 -type tcp -subtype general -server 192.168.1.80 -port 2112 - format "FORMAT" -eol NL -record call -localtime

ASB501 format

callinfo_output_set -output 0 -lim all -type tcp -subtype asb501 -server "192.168.1.80" -port 2112 -format -eol CRNL -record call -localtime

MDFP15 format

callinfo_output_set -output 0 -lim all -type tcp -subtype mdfp15 -server "192.168.1.80" -port 2112 -format -eol CRNL -record call -localtime

The following command starting the SMDR stream:

callinfo_status_set -state on -lim all -output OUT_NO
E.g.
callinfo_status_set -state on -lim all -output 0

where FORMAT - the necessary format name (see docs for the PBX);
OUT_NO - the output number from the callinfo_output_set command;
192.168.1.80 - IP address of a remote server, where our software was installed; 2112 - TCP IP port number on the server.

Configuring PBX Data Logger as a TCP client

Our software should work in the TCP client mode. It means that our software will initiate connection with the PBX and the PBX will work as a server. Add one or several PBX IP addresses here (the IP address of the (none)). The port number should match the port that you have defined within the PBX (2112 in the example below).

1. Add a new configuration with the TCP data source (if you didn't it before).

TCP/IP Data Interface

2. Configure the TCP settings as shown below.

192.168.1.220

2112

192.168.1.220:2112

Selecting the correct parser for Aastra MX-ONE (MDFP15 format)

Aastra MX-ONE (MDFP15 format)

Data items

Description	Data type	Column name
Call date and time	datetime	CALL_TIME
Call duration (s)	integer	CALL_DURATION_S
Call duration	datetime	CALL_DURATION
Call type	string	CALL_TYPE
Direction	string	DIRECTION
Access code 1	integer	FLAG4
Access code 2	integer	FLAG5
CO	string	TRUNK
Ext	string	EXT
Dialed phone	string	DIALED_PHONE
Caller phone	string	CALLER_PHONE
Forwarded from	string	FLAG2

Interested in reports for PBX usage?

Our PBX Reports utility provides various reporting options - manual, scheduled, and through email, built-in web server, and additional features. You can configure your call accounting system for Aastra MX-ONE (MDFP15 format). Look here

Want PBX call logs in a database?

The logger, with its standard feature, ensures real-time capture and exportation of SMDR or CDR data to your database. Follow this link

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.