bg

Panasonic KX-NS1000. SMDR/CDR data format and connection settings


This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.

Printing Out SMDR Using LAN Port

Systems compatible: Panasonic KX-NS1000, Panasonic KX-NS700, Panasonic KX-NS500, Panasonic KX-NS300, Panasonic KX-NSX1000, Panasonic KX-NSX2000

1. Go to 11.1 Maintenance → Main.
2. Set Port to LAN.
3. Under Print Information select which items you would like to get in the SMDR output.
3.1 Date format: MM-DD-YY.
3.2 Time format: 24H.

SMDR Settings

4. Click on SMDR Options tab.
5. Note the default SMDR Port Number and Password. (These can be changed at your own discretion, but for this document we will use the default settings.)

SMDR Options

Configuring PBX Data Logger as a TCP client

Our software should work in the TCP client mode. It means that our software will initiate connection with the PBX and the PBX will work as a server. Add one or several PBX IP addresses here (the IP address of the (none)). The port number should match the port that you have defined within the PBX (2300 in the example below).

1. Add a new configuration with the TCP data source (if you didn't it before).

TCP/IP Data Interface

2. Configure the TCP settings as shown below.

TCP Client Mode - Panasonic PBX

192.168.1.220

2300

192.168.1.220:2300

6. Configure our software to send password to the PBX.

By default, the Panasonic NS1000 system requires a username/password (default: SMDR/PCCSMDR) to connect to the TCP/IP feed.

You must activate the "Panasonic KX-NCP1000" data query plugin (the plugin name on the image below is just an example), click the "Setup" button and specify the password:

Note: this feature is available in the Trial, Professional and Enterprise versions only.

Parser Setup for Panasonic PBX

Panasonic KX-NS1000

Panasonic KX-NS1000

Date Format and Password

Activating SMDR records for all calls

On the "SMDR options" page just enable condition codes to enable call logging for all stages "RC" and "AN". "RC" stands for received and "AN" for answered.

PBX rejects connections

In this case the logger received "Rejected" when it tries to connect.

Solution: try to change the default SMDR TCP port number from 2300 to 22300 in everywhere (the PBX settings, the settings in our software), and reboot your PBX.

Data items

DescriptionData typeColumn name
Call datedatetimeCALL_DATE
Call time onlydatetimeCALL_TIME2
Call date and timedatetimeCALL_TIME
ExtensionstringEXT
COstringTRUNK
DirectionstringDIRECTION
Call typestringCALL_TYPE
DID name and numberstringDNIS
Caller numberstringCALLER_PHONE
Caller namestringFLAG3
Dialed numberstringDIALED_PHONE
RingdatetimeRING
Call durationdatetimeCALL_DURATION
Call duration (s)integerCALL_DURATION_S
CostfloatCOST
Account codestringACC
Condition codestringFLAG1

Interested in reports for PBX usage?

With our PBX Reports utility, you get manual, scheduled, and email reporting options, a built-in web server, and other functionalities. Set up your call accounting for Panasonic KX-NS1000. Check our PBX Reports utility.

Want PBX call logs in a database?

Real-time capture and export of SMDR or CDR data to your database is a standard feature of the logger. Check our article about call logging to a database.

Panasonic KX-NS1000 related connection settings

Panasonic KX-NCP1000
Panasonic KX-NCP500
Panasonic KX-NS300-NS500-NS700
Panasonic KX-NSX1000
Panasonic KX-NSX2000

Quick jump to the connection settings for other PBXs or connection formats ↴

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.