DNC and CNC setting for Yaskawa - Yasnac 2000G

Set the following parameters on the machine

Parameter 59	X set at 3
Parameter 59	Z defines a baud rate

Select the Z values from the list
110 baud rate	37327
300 baud rate	54734
600 baud rate	27598
1200 baud rate (recommended)	13774
2400 baud rate (recommended)	7118
4800 baud rate (recommended)	54733
9600 baud rate (recommended)	54733

Set the following parameters on the PC

Serial port tab

Machine name	Yaskawa - Yasnac 2000G
Serial port	COM2 (or any free COM port)
Baud	1200
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	False
Require DSR	False
Require CTS	False
Set RTS	True
Set DTR	True
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: %% Program end: %% Line start: Line end: #0D#0A Skip lines: ; Ignore characters: No characters for remove Remove blank lines: No Program name prefix: : Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Wenzler MTA-6
Wenzler MTA-8
Yaskawa - Yasnac LX-1
Yaskawa - Yasnac MX-1
Yaskawa - Yasnac MX-2

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.