DNC and CNC setting for Yaskawa - Yasnac MX-2

Set the following parameters on the machine

6026 (baud rate)	0001 1000 (2400)
6028 (baud rate)	0001 1000 (2400)

Change following bits in the parameter #6000 only
bit 7	1 (ISO format)

Change following bits in the parameter #6003 only
bit 5	1
bit 1	1

Change following bits in the parameter #6021 only
bit 6	0
bit 5	0
bit 4	0
bit 1	0

Change following bits in the parameter #6022 only
bit 1	1
bit 0	1

Set the following parameters on the PC

Serial port tab

Machine name	Yaskawa - Yasnac MX-2
Serial port	COM2 (or any free COM port)
Baud	2400
Data bits	7
Parity	Even
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	True
Set DTR	True
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: % Program end: % Line start: Line end: #0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Yaskawa - Yasnac LX-1
Yaskawa - Yasnac MX-1
You Ji CNC

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.