DNC and CNC setting for Fanuc 0I-M

Set the following parameters on the machine

Set to MDI mode or emergency stop state

Press function key several times or press soft key [SETTING] to display SETTING (HANDY) screen.

Set the cursor to PARAMETER WRITE and, press and keys in this order. Here alarm 100 will be displayed.

Press function key several times to display parameters screen.

. Set the following parameters:
IO CHANNEL	0
TAPE FORMAT	0
PUNCH CODE	1
TV CHECK	0

Please, select following mode 'Offset Setting -> System -> Parameter (setting) and set following parameters
#0000 (ISO mode)	0000 0010 (TVC=0, TV check off; ISO=1, ISO mode enabled)
#0020 (IO Channel)	0 (Channel 1, RS232, JD56A of mother board)
#0100 (Program format)	NCR=1, CRF=0, Line end format: LF, ND3=1 - drip feed mode
#0101 (Stop bit and other data)	1000 0001 (NFD=1, Feed is not output; ASI=0, ISO mode; SB2=1, two stop bits)
#0102 (Device number)	0 (RS-232)
#0103 (Baud rate)	9 (2400)
#0134 (Parity)	PRY=1 (Use parity checking, power off/on machine after changing)

If you want you can change baud rate in the parameter #0103 to:
Baud	Parameter value
1200	8
2400	9
4800	10
9600	11
19200	12

Set the following parameters on the PC

Serial port tab

Machine name	Fanuc 0I-M
Serial port	COM2 (or any free COM port)
Baud	9600
Data bits	7
Parity	Even
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: % Program end: % Line start: Line end: #0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Fagor 8040/8050
Fanuc 0-P
Fanuc 0I-T
Fanuc 0M-C
Fanuc 0M-D

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.