DNC and CNC setting for Wenzler MTA
These settings are for the DNC Precision software only. They may not work with other software.
Wenzler MTA-6 - DNC settings
Set the following parameters on the PC
Serial port tab
| Machine name | Wenzler MTA-6 |
| Serial port | COM2 (or any free COM port) |
| Baud | 4800 |
| Data bits | 7 |
| Parity | Even |
| Stop bits | 2 |
Data flow control tab
| Use DTR | True |
| Use RTS | True |
| Require DSR | False |
| Require CTS | False |
| Set RTS | False |
| Set DTR | False |
| Software flowcontrol | Both |
| Xon char | #11 |
| Xoff char | #13 |
Data exchange format tab
| Format mode | Uniform |
| Format parameters | Program start: %%
Program end: #14
Line start:
Line end: #0A#0D
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No |
Wenzler MTA-8 - Machine parameters
Set the following parameters on the PC
Serial port tab
| Machine name | Wenzler MTA-8 |
| Serial port | COM2 (or any free COM port) |
| Baud | 4800 |
| Data bits | 7 |
| Parity | Even |
| Stop bits | 2 |
Data flow control tab
| Use DTR | True |
| Use RTS | True |
| Require DSR | False |
| Require CTS | False |
| Set RTS | False |
| Set DTR | False |
| Software flowcontrol | Both |
| Xon char | #11 |
| Xoff char | #13 |
Data exchange format tab
| Format mode | Uniform |
| Format parameters | Program start: %%
Program end: #14
Line start:
Line end: #0A#0D
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No |
Go to Index page
Viking 150T
Victor Taichung - V630
Yaskawa - Yasnac 2000G
You Ji CNC
If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.
