Set the following parameters on the machine
| Preparation data #1 | |
| 01 (parity) | 0 |
| 04 (ISO/EIA output) | 1 |
| Preparation data #2 | |
| 12 (baud rate) | 5 (2400) |
Set the following parameters on the PC
Serial port tab
| Machine name | Traub - Traub system TX-8-k |
| Serial port | COM2 (or any free COM port) |
| Baud | 2400 |
| Data bits | 7 |
| Parity | Even |
| Stop bits | 2 |
Data flow control tab
| Use DTR | False |
| Use RTS | True |
| Require DSR | False |
| Require CTS | True |
| Set RTS | False |
| Set DTR | False |
| Software flowcontrol | None |
| Xon char | #11 |
| Xoff char | #13 |
Data exchange format tab
| Format mode | Uniform |
| Format parameters | Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No |