DNC and CNC setting for Tanaka

Set the following parameters on the machine

PARA1	0000 0000
PARA2	0000 0010
PARA3	0000 0100
PARA4	0000 0000
PARA5	0000 0000
PARA6	0000 0000
PARA7	0000 0000
PARA8	0000 0000
PARA9	0000 0000

Set the following parameters on the PC

Serial port tab

Machine name	Tanaka
Serial port	COM2 (or any free COM port)
Baud	1200
Data bits	7
Parity	Even
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Supermax CNC
Takumi V8, V11 - Vertical machining center
Traub - Traub system TX-8-k
Victor Taichung - H630
Victor Taichung - V105

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.