DNC and CNC setting for Leadwell - V80i

Set the following parameters on the PC

Serial port tab

Machine name	Leadwell - V80i
Serial port	COM2 (or any free COM port)
Baud	9600
Data bits	7
Parity	Even
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	False
Require DSR	False
Require CTS	False
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: %% Program end: %% Line start: Line end: #0A Skip lines: Ignore characters: #0D Remove blank lines: No Program name prefix: O Program starting characters in the file: Yes Program ending characters in the file: Yes

Go to Index page
Leadwell - V20i
Leadwell - V50i
Maho - CNC 432 - 1000
Maho - CNC 432 - 2000
Mazak - Fusion 640M

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.