DNC and CNC setting for Heidenhain-TNC 425

Set the following parameters on the machine

Interface type	EXT2
Baud rate	9600
MP5200.1 (external device)	2
MP5201.1 (external device)	3
MP5020.1	104
MP5030.1	0

Set the following parameters on the PC

Serial port tab

Machine name	Heidenhain-TNC 425
Serial port	COM2 (or any free COM port)
Baud	2400
Data bits	7
Parity	Even
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Heidenhain-TNC 407
Heidenhain-TNC 415B
Hinumerik 2000M
Hinumerik 2000T
Hinumerik 2100M

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.