bg

DNC and CNC setting for Grundig

These settings are for the DNC Precision software only. They may not work with other software.

Grundig - NC settings

Set the following parameters on the PC

Serial port tab

Machine nameGrundig
Serial portCOM2 (or any free COM port)
Baud2400
Data bits7
ParityEven
Stop bits2

Data flow control tab

Use DTRFalse
Use RTSTrue
Require DSRFalse
Require CTSTrue
Set RTSFalse
Set DTRFalse
Software flowcontrolNone
Xon char#11
Xoff char#13

Data exchange format tab

Format modeUniform
Format parametersProgram start:
Program end:
Line start:
Line end: #0D#0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Gildemeister CTX
Generic CNC machine
Haas Lathe
Haas Mill

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.