DNC and CNC setting for Gildemeister CTX

Set the following parameters on the PC

Serial port tab

Machine name	Gildemeister CTX
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	False
Require DSR	False
Require CTS	False
Set RTS	False
Set DTR	False
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Data reception
Format parameters	Program start: Program end: %%~ Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: %% Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
GE Mark Century Plus
Generic CNC machine
Grundig
Haas Lathe
Haas Mill

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.