DNC and CNC setting for Digma CNC

Set the following parameters on the PC

Serial port tab

Machine name	Digma CNC
Serial port	COM2 (or any free COM port)
Baud	9600
Data bits	7
Parity	Odd
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	False
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: BEGIN Program end: END Line start: Line end: #0A Skip lines: Ignore characters: No characters for remove Remove blank lines: Yes Program name prefix: . Program starting characters in the file: Yes Program ending characters in the file: Yes

Go to Index page
Dialog-2
Dialog-4
Eckelmann - Viewstar 750
Ellison Technologies - Puma VT900
Fadal VMC

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.