DNC and CNC setting for Digma CNC
These settings are for the DNC Precision software only. They may not work with other software.
Digma CNC - Machine parameters
Set the following parameters on the PC
Serial port tab
Machine name | Digma CNC |
Serial port | COM2 (or any free COM port) |
Baud | 9600 |
Data bits | 7 |
Parity | Odd |
Stop bits | 2 |
Data flow control tab
Use DTR | False |
Use RTS | True |
Require DSR | False |
Require CTS | False |
Set RTS | False |
Set DTR | False |
Software flowcontrol | Both |
Xon char | #11 |
Xoff char | #13 |
Data exchange format tab
Format mode | Uniform |
Format parameters | Program start: BEGIN
Program end: END
Line start:
Line end: #0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: Yes
Program name prefix: .
Program starting characters in the file: Yes
Program ending characters in the file: Yes |
Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
Go to Index page
Dialog-4
Delta Dynapath
Eckelmann - Viewstar 750
Ellison Technologies - Puma VT900
If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.