DNC and CNC setting for Acramatic - A2100

Set the following parameters on the PC

Serial port tab

Machine name	Acramatic - A2100
Serial port	COM2 (or any free COM port)
Baud	9600
Data bits	8
Parity	None
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	True
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Data reception
Format parameters	Program start: (PGM Program end: %% Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: Yes Program ending characters in the file: No

Go to Index page
Allen Bradley 8600
Amada - Aries 245
Anilam Crusader II L

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.