bg

DNC and CNC setting for Amada

These settings are for the DNC Precision software only. They may not work with other software.

Amada - Aries 245 - NC settings

Set the following parameters on the machine

Baud rate9600
ParityEven
Stop bits2
Data bits7
Punch code1 (ISO)
Decimal input0 (YES)

Set the following parameters on the PC

Serial port tab

Machine nameAmada - Aries 245
Serial portCOM2 (or any free COM port)
Baud9600
Data bits7
ParityEven
Stop bits1

Data flow control tab

Use DTRFalse
Use RTSTrue
Require DSRFalse
Require CTSTrue
Set RTSTrue
Set DTRTrue
Software flowcontrolNone
Xon char#11
Xoff char#13

Data exchange format tab

Format modeUniform
Format parametersProgram start: %#0A
Program end: %
Line start:
Line end: #0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Allen Bradley 8600
Acramatic - A2100
Anilam Crusader II L
Anilam Crusader II M

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.