Logging and capturing data from Setra (EasyCount,QuickCount)

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

Description	Data type	Column name
Weight	float	WEIGHT
Weight units	string	WEIGHT_UNITS

RS232 Communication Parameters

For both Setra EasyCount and QuickCount scales, the typical RS232 communication parameters are:
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None

Standard Commands

Here are some common commands that you might use with these scales:

Request Weight: W
This command requests the current weight from the scale. The response is typically in the format: xxxxx.xx g for grams or similar for other units.

Request Status: S
This command requests the current status of the scale. The response may include information such as stability, tare status, and error codes.

Print/Send Data: P
This command sends the current weight data to the connected device or printer. The response is usually the weight data in the current unit format.

Example Communication

Command: W#0D
Response: 123.45 g

How to configure the logger for the Setra (EasyCount,QuickCount).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Setra (EasyCount,QuickCount) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Scientech Scale
Setra (500C,2000C,5000C,12000C)
Setra Scale
Soehnle B3C Serenite (protocol F501) Scale
Soehnle B3C Serenite (protocol Multipoint 2000) Scale

Please select datasheet page A&D Scale Acculab Scale Adam (AE Indicator,GK Indicator,Normal Output) Adam (AFK,ABK) Adam (GBK,GFK Single Line Format) Adam (GBK,GFK Standard Format) Adam (GC Indicator,Normal Output) Adam (Nimbus, Eclipse, Single Line Format) Adam (Nimbus, Eclipse, Standard Format) Adam Equipment CPW Scale Adam Equipment Highland Series Scale Adam PGW Balance Arlyn Scale Avery Scale BVS-TSK5 Balance Bilanciai Scale Cardinal Scale Combics Scale Denver Instrument Scale Denver Pinnacle Balance Denver Summit Balance Denver Timberline Balance Denver XP Balance Digi (Standard Stream Type) EXA ECO Scale Elane Scale FB2200 Scale Fairbanks 70-2453-4 Scale Fairbanks h90-5002a Scale G&G (TC50K,TC60K,TC100K,TC150K,TC200K,TC300K) GSE Scale Gemplus Scale Ian Fellows CSW-20 Series Scale Kern & Sohn Gmbh Scale, Balance Kern & Sohn Gmbh Scales and Balances Lexus (Matrix) Magellan RS232 Scale Interface Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105) Mettler Toledo BC Scale Mettler Toledo C35 Mettler Toledo Scale Mettler Toledo Standard Interface Mettler Toledo Viva (NCI Protocol) Mettler Toledo Wildcat Scale Myweight HD Series SCI.0 Mode (HD-150,HD-300) NCI Standard Protocol NCR Scale,scanner Ohaus Aviator (NCI Protocol) Ohaus Pioneer Balance Ohaus Scale Penko Indicator (PC Protocol) Pennsylvania 7000 Series Scale Radwag Scale Rice 920 Scale Rice Lake IQ Plus Digital Weight Indicator (edp Mode) Scale Rice Lake IQ Plus Digital Weight Indicator (normal Mode) Scale Salter Brecknell Scale Sartorius Balance Scientech Scale Setra (500C,2000C,5000C,12000C) Setra (EasyCount,QuickCount) Setra Scale Soehnle B3C Serenite (protocol F501) Scale Soehnle B3C Serenite (protocol Multipoint 2000) Scale Soehnle B3C Serenite (protocol Saie) Scale Soehnle B3C Serenite (protocol Tisa) Scale Systec (Flintec Protocol) Systec (SysTec Protocol) TOR REY (EQB 100,EQB 200) TREE (HRB 103,HRB 602,HRB 1002,HRBE) Thompson Scale (5511) Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus) Weigh-tronix Scale Western M2000 (DF2000 Mode) Scale

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.