DNC and CNC setting for Pro Elesta

Set the following parameters on the machine

P68	3
P69	0 (ISO code, 7 data bits, Even parity, 2 stop bits)
39 (baud rate)	4800
44 (punch device)	0
46 (output device)	0
54 (read device)	1
57 (time before alarm)	90
Optional parameter bits #1 (ISO code)	0000 1011
Optional parameter bits #2	0000 0000
Optional parameter bits #12 (stop bits, parity)	1010 0010
Optional parameter bits #21	0000 0000

Set the following parameters on the PC

Serial port tab

Machine name	Pro Elesta
Serial port	COM2 (or any free COM port)
Baud	1200
Data bits	7
Parity	Even
Stop bits	2

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: % Program end: % Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Omni Turn
Phillips - Maho 432
Siemens - Sinumerik 3M
Siemens - Sinumerik 3T
Siemens - Sinumerik 802D

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.