DNC and CNC setting for Amada - Aries 245

Set the following parameters on the machine

Baud rate	9600
Parity	Even
Stop bits	2
Data bits	7
Punch code	1 (ISO)
Decimal input	0 (YES)

Set the following parameters on the PC

Serial port tab

Machine name	Amada - Aries 245
Serial port	COM2 (or any free COM port)
Baud	9600
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	True
Set DTR	True
Software flowcontrol	None
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: %#0A Program end: % Line start: Line end: #0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Go to Index page
Acramatic - A2100
Allen Bradley 8600
Anilam Crusader II L
Anilam Crusader II M
Autocon

If you have successfully connected DNC Precision with any other controller not in this list, we would appreciate your sending us the details to add to the list.

Note: We are not responsible and do not provide guarantee for any of these settings, that have been sent us by our customers.